1995 junkyard stang

[wgeous]

Did u have to remove the AC condenser to be able to take the rad support out ? Im doing mine tomorrow and im wondering if i can just zip tie it to the engine just so i dont loose my 134a .

I don't think you have to remove it. But it would probably be simpler if you did. Look on passenger side, there should be brackets holding a/c lines to frame. You should have enough room to play with, remove them and tie up. I There is always a right way, wrong way and your way. The one I ordered from ebay was a 94-95 model, but the one they sent me was for a 96-98 sn95, talking about modifying it to fit. The condensor brackets are different radiator bracket different.

 

[94RedGt]

Well i did mine today, i also got an ebay one but it was the correct one, besides being a bit weaker than the original piece i got no complaints, since its thinner metal it shaved some # of the nose so thats always a plus. Anyways it took me and my buddy 10 hours for the job lol, we took longer cuz we had to cut and make a piece of the driver side apron from scratch, this car was in an accident and from the shock tower to the front the frame rail was pushed in one inch lol. Nothing a `1500 # cable puller and a wooden post wont fix. Anyways after alot of drilling and welding the thing was on and it took us most of the time putting all the body panels back since it was dark.

 

[wgeous]

Sorry for delay guys no pics today. I've installed transmission and all is well. Transmission shifts smoothly. Drove down street and made a block, as I don't have insurance or inspection sticker.

This is pic of old clutch arm, the fingers that hold the pivot ball were worn, had no tension. So I replaced with new one from ebay, its for a 4.6. I've ordered pacesetter x-pipe they arrived today. I'll get of pic.

 

[wgeous]

Anyone have 94-95 timing cover and alternator bracket for sale?

 

[turbosnake281]

Did u have to remove the AC condenser to be able to take the rad support out ? Im doing mine tomorrow and im wondering if i can just zip tie it to the engine just so i dont loose my 134a .

Zip tie !!!

 

[wgeous]

update

Hey guys, haven't updated lately. Here ya go.

I changed timing cover and serpentine brackets.

[/IMG]

 

[wgeous]

Changed lights to one piece from ebay.

[/IMG]

 

[wgeous]

Hooked exhaust up

[/IMG]

 

[SN95nut]

looking good

 

[John Nich]

Damn man...Very nice!

 

[MustangChris]

hm. im super curious on how your exhaust will sound! :-D