egr tube with intake spacer?

[RJDCobra]

is there any extension adapter for the egr tube? i have to use a 3/8 intake spacer to my upper intake can clear my trickflow valvecovers. with the upper intake/egr valve raised i cut the egr tube and clamped a rubber heater hose in the gap, but it pops a hole in it about every 3-4 months of driving. im looking for a more permanant fix. didnt edelbrock or russell or who ever have a adapter that bolts to the header primary bung. or anyone know of a homemade trick?

 

[95-stang]

I just found some tube the same o\d and welded it in to extend it.

 

[Paul]

http://www.latemodelrestoration.com/item/PP-54152

 

[RJDCobra]

thanks paul. that is exactly what i was looking for.

 

[Paul]

No prob dude. That's what I'm here for.

 

[FULLSCALE]

Will that adapter only add 3/8" to the tube or could I use it with my 1" spacer? I guess I could just put two together but that would probably look like crap. Does anyone make an adapter for a 1" spacer?

 

[Paul]

You'll need more than one. Or just don't run an intake spacer.

 

[blackpony]

Will that adapter only add 3/8" to the tube or could I use it with my 1" spacer? I guess I could just put two together but that would probably look like crap. Does anyone make an adapter for a 1" spacer?

you could maybe use one on top and one on bottom... should blend in and be ok....