Ga emissions

[armyed]

Ok....does anyone have any experience with emissions in Ga. Im putting a 331 setup in my car in March. Wondering what all I need to do to get it to pass emmisions. heres the setup so far.

DSS 331 Stoker Pro Bullet

Level 10 CNC Block
Forged I Beam Rods
ARP Bolts Throughout
Forged Pro-X Pistons #4110 -13cc 8.5 to 1 with 60cc heads
DSS Low Profile 7qt pan
DSS Billet Aluminum Main Support
SFI 28oz Romac Balancer
SFI 28ox PRW Flywheel
Melling High Volume Oil Pump
ARP Oil Pump Drive shaft
Edelbrock Timing Chain

Im wanting to put on AFR 185's
TF Stage 1 preferably Stage 2 cam
Edelbrock or Trickflow Intake or maybe my cobra one can stay.
1.7RR

So if anyone was any ideas about emmisions...if I need my EGR or anything since on my stock motor right now EGR isnt hooked up. any ideas?

 

[94GTcobra]

the tfs cams are not smog legal, they dont have a carb #. You might want to go with steeda #19 or Crane 2031.

 

[ga94gt]

There are emissions in GA? I did not know that.

 

[armyed]

yea there are emissions around the metro area....it really blows..these are the counties that have the smog checks. Any help from anyone would be great..thanks

Cherokee
Clayton
Cobb
Coweta
DeKalb
Douglas
Fayette
Forsyth
Fulton
Gwinnett
Henry
Paulding
Rockdale "

 

[Suspect]

yea im right there on coweta/fulton. so im stuck with getting tested.

just gotta find the right person to test ur car. i have passed the last 2 years ez. but itll prolly be another story this year when i put in the 347.

 

[armyed]

yea I feel your pain. I just hope the guy I always get mine done at isnt on top of the whole aftermarket parts thing...he has never seemed to be the smartest guy to me and didnt catch the fact that my smog wasnt hooked up so we shall see again

 

[Suspect]

i plan on taking all the smog stuff off when i pull mine out.

the guy i went to this past time didnt even look. he ask which was the smog... i pointed to my ac and he didnt say anything. lol. :santa_grin:

 

[armyed]

ummmmmm where is this glorious place you speak of? hahahaha

 

[Suspect]

:santa_grin: gas station in newnan. yea im hoping hes still there this year. if not i know someone, so im not stressin it.

 

[armyed]

is this someone you could maybe hook me up with? It would be nice to have a guy to fall back on. I used to have a guy but he got stupid and started doing that stuff for people walking up to him asking him to do it for him..what an idiot. Any help?

 

[Suspect]

pm.

 

[birel21y]

Honestly, smog tests arent that big of deal... i know california is strict, and i passed like a honda. .. with no air pump, half my cats working, and no egr.

Make sure all your plugs / wires are new.. new pvc valve .. oil changed..ect.

Retard your timing to where it idles lumpy., but watch your temp during the test. Retarding your timing will make your engine run hot.

Hope this helps.

 

[armyed]

THanks man I think I found me a solution to all my problems so i should be good. Thanks for all yalls help

 

[Win]

Yeah i passed with flying colors this year. But i am sure next year will be a different story

 

[armyed]

what are your motor specs

 

[Win]

Well i just starting to do a build so by next Oct when i have to have it again i am not sure what i am going to do. I just have a stock 302 with 170k on the clock

 

[Win]

Do you know anywhere i can get 2 tires. I just need to get 2 to last me about 6 months till i get some crap figured out.

245/45/17 or anything in between that and a 275/40/17

 

[armyed]

where do you live?

 

[Win]

Sandy Springs right next to roswell and marietta

 

[armyed]

well I have 245 17 in front and 275 17 in back and I was thinking about going with some 18 inch rims...it will be a couple months till I get some new rims if I do...when that time comes if you still need some tires you can have the ones on my rims now. But right now im in Iraq so cant help yea.