What Did You Do To Your Car Today?

[RAU03MACH]

I got the catch cans done
Then noticed the dome light not turning off
So my dumb ass gose and pushes the switch in on the driver side and broke the switch
It ended up being the passenger side faulty
Orderd 2 switches
It never ends

 

[lwarrior1016]

I got the catch cans done
Then noticed the dome light not turning off
So my dumb ass gose and pushes the switch in on the driver side and broke the switch
It ended up being the passenger side faulty
Orderd 2 switches
It never ends

I did the same thing on my car a few years ago. I just pulled the dome light bulb out lol. I need to fix that

 

[Musturd]

https://lmr.com/item/AMV-16307/aeromotive-heavy-duty-fuel-pump-wiring-kit

Various companies offer these my car was starting to drop a little pressure in higher rpm , I haven’t datalogged since I hooked this back up . It was originally powering my T. rex pump which is gone now . I’m going to do a datalog tomorrow and see if it stays steady in the higher rpm . My car shoulda had more than enough pump being a 340lph . I bought a new pump just in case but I’m testing this with the wiring upgrade and 30 amp relay first .

 

[maillemaker]

It never ends

 

[Idlehands78]

It never ends

Truer words......

 

[cobrajeff96]

I did a thing today.

Put some Quick Latch hardware on the intake manifold. I can then snap on and snap off the intake manifold cover and have it look pretty at the same time. Got a clearance of about 1/4" from the intake cover to the main beam of the strut tower brace, not to little and not too great.

I think the whole thing came out decent. Just too bad I don't get to see all the inner workings I created beneath it unless it's removed.

 

[badass98svt]

I drove it!!! Spring has sprung here, I've had my car out a few times now. Probably about 30 miles on it so far this year.
Last year I did about 400 miles. Hoping I surpass that by a good amount this year.

 

[badass98svt]

I did a thing today.

Put some Quick Latch hardware on the intake manifold. I can then snap on and snap off the intake manifold cover and have it look pretty at the same time. Got a clearance of about 1/4" from the intake cover to the main beam of the strut tower brace, not to little and not too great.

I think the whole thing came out decent. Just too bad I don't get to see all the inner workings I created beneath it unless it's removed.

I like the way it looks with no plastic cover.

 

[joemomma]

Drove mine to work twice this week, so that's a win. Realized it needs a bath, and I need to polish the exhaust tips.

 

[Musturd]

I drove it!!! Spring has sprung here, I've had my car out a few times now. Probably about 30 miles on it so far this year.
Last year I did about 400 miles. Hoping I surpass that by a good amount this year.

Hopefully 1500 miles this year . I only got about 1500 on mine last year . Trying to do atleast 5k miles this year

 

[cobrajeff96]

I like the way it looks with no plastic cover.

I kind of like the bare look too, but I like the covered look just a tiny bit more. Past the point of no return anyway with the dremeling of the intake to get it all to fit properly.

 

[Musturd]

Got the exhaust modified and refit for maximum ground clearance and proper fitment . Slammed cars and 3” exhaust can be a chore

 

[white95]

Slammed cars and 3” exhaust can be a chore

Shit.. That is an understatement.

 

[white95]

Had a busy morning! I’ll save the specifics for my build thread.

1. Fuel pump/strainer
2. Fuel filter
3. Headlight panel
4. Repainted the gas tank cover
5. Cleaned the jungle gym and 8.8
6. Washed
7. Drove it around to datalog

Installed the S197’s new grille and painted the defunct fog lights flat black until I buy a new set.

 

[NEW EDG]

View attachment 25171

Had a busy morning! I’ll save the specifics for my build thread.

1. Fuel pump/strainer
2. Fuel filter
3. Headlight panel
4. Repainted the gas tank cover
5. Cleaned the jungle gym and 8.8
6. Washed
7. Drove it around to datalog

Installed the S197’s new grille and painted the defunct fog lights flat black until I buy a new set.

View attachment 25170

It's almost like your S197 is wearing pasties. Maybe if I throw a few more singles she'll take them off.

 

[white95]

It's almost like your S197 is wearing pasties. Maybe if I throw a few more singles she'll take them off.

Bands will make her dance.

 

[Musturd]

I just washed it and drove it today . Time for some suspension changes . This thing doesn’t work nearly as good as I expect on the street . Weight transfer is non existent

 

[tmwsccsh]

What's with the fighter jet at the side of the road in the 3rd picture?

TMW

 

[Musturd]

What's with the fighter jet at the side of the road in the 3rd picture?

TMW

It’s at the airport down the street from my house . Had to talk to the owners about doing a rental .

 

[RAU03MACH]

One of my door switches came in
For my cobra
Get it out of the way start my building by next week
Still need concrete bolts and mounting brackets