OP
OP
Hey I’m making progress by my standards.
White's '95 GT "Unicorn"
- Thread starter white95
- Start date
ElrodKTPQ_89
Legend
Don’t we all though
This build thread has gone to fucking hell.
Cause you aren't filling it with any build..
OP
OP
The mundane side of progress:
More rust removal:
More rust removal:
Last edited:
DKblue98GT
Well-Known Member
- Joined
- Dec 19, 2009
- Messages
- 1,406
- Reaction score
- 333
What gears are in it? What are you doing for speed calibration?
OP
OP
4.10
All that will be handled by the Holley HP but I’m not using the stock gauges but, that being said, I don’t have the aftermarket display yet.
OP
OP
Once that dries I’m gonna bolt two wheels on, flip it over and coat the bottom. This is just the first coat.
ttocs
Post Whore
IIRC he is going holley hp and the digital dash has gps speedo
IIRC he once had the digital dash............... [emoji38]
Sent from my iPhone using Tapatalk
OP
OP
IIRC you’re still an asshole
I’m torn between one of the Holley dashes or the AiM MXG Strada
7”
12”
AiM MXG Strada 1.2
Last edited:
OP
OP
Bottom side coated:
ttocs
Post Whore
Well now he hit the nail on the head there now didn't he? And we know because it takes one to know one....IIRC you’re still an asshole
I’m torn between one of the Holley dashes or the AiM MXG Strada
7”
That new bigger screen does look nice right up till you go to pay. I do wish the one I had was bigger but I like have the plx gauges on separate senders so I can have the redundancy to know if one does go bad I can see the other. The only other advantage to the holley screens that I don't think the aftermarket screens can do is to access the tuning software to make changes. I personally have not done this myself as I have always hooked my pc up, and hate the idea of doing it through the dash because the position you have to be in to actually do that is not comfortable but I would if I had to and its good to know I can.
OP
OP
The prospect of tuning through the screen does seem like a PITA. I’m going to buy a tablet to tune with and use this mount for it:
https://www.mpsracing.com/products/MPS/TabletMount.asp
I’ve also considered using the Holley analog (Can bus) gauges in a Florida 5.0 panel for a stockish appearance.
ttocs
Post Whore
I would save the mounting for it if I were you. You really only need it to make changes during the initial start up. You can set it up to datalog anytime you want and activate it through the screen as well.
OP
OP
Those are excellent points. I can also use the gauges in the software instead of having them in the dash for the time being!
ttocs
Post Whore
you can display 10x more data on a pc then on the digital dash but at some point its info overload. Its nice to be able to change it to show what ever you want and change it later if you need. When I tps was giving me problems I set it up to show on a gauge just to make it easier.
OP
OP
Late night..
OP
OP
Lots of progress to report! Pictures later tonight!
ttocs
Post Whore
post as many pics as you can of that snap on tool box it has me drooling...
Similar threads
