19mustang95
Legend
- Joined
- Jun 25, 2006
- Messages
- 6,132
- Reaction score
- 5
I'm finally getting started on this project. I got someone to come pick up the old 96 convertible that i took almost all the parts off i needed for the swap. Sold the T56 i had in that car and picked up a low mile T45. Although the T56 was a super nice trans, the gears in it suck. I've had good luck with T45s, and the gears are much better for racing. Should be fun with the 4.56s and maybe some giggle juice..
The Basics:
91 4cyl/auto notch
01 Cobra Motor
99 Cobra T45
96 Cobra 8.8 with 31 spline axles, spool, 4.56s
Complete wiring harness out of a 96 GT
The Car:
What i've got done today..


Fox front end assembly > SN95 front end

anyway, the motor and trans is almost ready to come out. Just need to undo the motor mounts and it can go. Might hold off on that though since i don't have room left in the garage to put it somewhere. After lunch i'm going to start removing the interior so i can get the fox body harness out of the car.
The Basics:
91 4cyl/auto notch
01 Cobra Motor
99 Cobra T45
96 Cobra 8.8 with 31 spline axles, spool, 4.56s
Complete wiring harness out of a 96 GT
The Car:
What i've got done today..


Fox front end assembly > SN95 front end

anyway, the motor and trans is almost ready to come out. Just need to undo the motor mounts and it can go. Might hold off on that though since i don't have room left in the garage to put it somewhere. After lunch i'm going to start removing the interior so i can get the fox body harness out of the car.


