97stanger
Legend
- Joined
- Mar 22, 2006
- Messages
- 5,880
- Reaction score
- 100
I've been doing some researching on some of the turbo parts I'm going to need for my setup and wanted to start to gather some parts when I found good deals online. Just looking for feedback and opinions on this intercooler, waste gate, blow off valve, and boost controller:
Treadstone TRV2x9 --- I'm planning on going with a CG Fab hot side, and probably a custom 3" cold side. Is it easier to have the fab work done with the same side inlet/out or the opposite side?
http://www.maperformance.com/products/treadstone-3-50-trv259-intercooler-trv259x
Tial 44mm Wastegate --- I was most likely going to get the hot side with the 44mm Tial provision already made for the waste gate. With my goals, I'll probably run 10-12 psi consistently on the street, but with the 76mm turbo will probably turn it up to 20 or so psi for the higher hp goals. Thoughts on this 44mm?
http://www.maperformance.com/products/tial-mv-r-44mm-wastegate-mv-r-44mm?variant=8083503299
Innovate SCG-1 Wideband/Boost controller --- I already have an AEM Uego wideband, but this looks like an awesome option to combine a wide band and a boost controller in one gauge, that way I can just replace my AEM with this gauge and now have a multifunctional gauge for both features. Thoughts?
http://www.maperformance.com/produc...boost-controler-w-digital-display-by-innovate
Tial 50mm Q Series BOV --- Is there any benefit to going with a certain material flange? What's the most common I should be looking to get? You have to select what psi spring for the BOV, how do you go about deciding which spring I should be getting with the BOV? The options are 6, 8, 10, or 11.
http://www.maperformance.com/products/tial-sport-q-vent-to-atmosphere-blow-off-valve-tial-q
Any input/experience with the above parts are appreciated.
Treadstone TRV2x9 --- I'm planning on going with a CG Fab hot side, and probably a custom 3" cold side. Is it easier to have the fab work done with the same side inlet/out or the opposite side?
http://www.maperformance.com/products/treadstone-3-50-trv259-intercooler-trv259x
Tial 44mm Wastegate --- I was most likely going to get the hot side with the 44mm Tial provision already made for the waste gate. With my goals, I'll probably run 10-12 psi consistently on the street, but with the 76mm turbo will probably turn it up to 20 or so psi for the higher hp goals. Thoughts on this 44mm?
http://www.maperformance.com/products/tial-mv-r-44mm-wastegate-mv-r-44mm?variant=8083503299
Innovate SCG-1 Wideband/Boost controller --- I already have an AEM Uego wideband, but this looks like an awesome option to combine a wide band and a boost controller in one gauge, that way I can just replace my AEM with this gauge and now have a multifunctional gauge for both features. Thoughts?
http://www.maperformance.com/produc...boost-controler-w-digital-display-by-innovate
Tial 50mm Q Series BOV --- Is there any benefit to going with a certain material flange? What's the most common I should be looking to get? You have to select what psi spring for the BOV, how do you go about deciding which spring I should be getting with the BOV? The options are 6, 8, 10, or 11.
http://www.maperformance.com/products/tial-sport-q-vent-to-atmosphere-blow-off-valve-tial-q
Any input/experience with the above parts are appreciated.