More PICS YAY, I took off the old emblems today I think they came out very good. I took a few pics nothing too in depth but long story short if you're looking to replace the old emblems with the new 5.0 coyote ones be aware there are two holes one is pretty large but it works perfectly if you cover it with a part of the 5 on the pass. side and part of the 0 on driver's I measured it and used a level and they both came out to 3/4" off of the end of the fender closet to the door and about 13 and 3/8" from the bottom of the fender. I pulled them off with my hands was not too hard then used a magic eraser for a little bit with some good old h2o then used some detailing clay and went back and forth between the two for about 5-10 minutes per side to make sure the surface was clean. I heard people saying use goof off and shit but man **** that, just use water and what I did and stay safe for the paint's sake!I used painters tape to tape the edges of the level where it would touch the car etc make sure to have everything ready before hand and know how you're going to attack it before you start. I also just got a Samsung Galaxy s4 (I HATED MY IPHONE5) this thing's camera is fkn sweet so I took some pics lol first pics are showing the prep and tools I used to the debadging/badging and others were just to be like weeee now you can actually see my car in a good pic lol.